Simultaneous speciation of mercury and butyltin compounds in natural waters and snow by propylation and species-specific isotope dilution mass spectrometry analysis

A robust method has been developed for simultaneous determination of mercury and butyltin compounds in aqueous samples. This method is capable of providing accurate results for analyte concentrations in the picogram per liter to nanogram per liter range. The simultaneous determination of the mercury and tin compounds is achieved by species-specific isotope dilution, derivatization, and gas chromatography–inductively coupled plasma mass spectrometer (GC–ICP–MS). In derivatization by ethylation and propylation, reaction conditions such as pH and the effect of chloride were carefully studied. Ethylation was found to be more sensitive to matrix effects, especially for mercury compounds. Propylation was thus the preferred derivatization method for simultaneous determination of organomercury and organotin compounds in environmental samples. The analytical method is highly accurate and precise, with RSD values of 1 and 3% for analyte concentrations in the picogram per liter to nanogram per liter range. By use of cleaning procedures and SIDMS blank measurements, detection limits in the range 10–60 pg L^–1 were achieved; these are suitable for determination of background levels of these contaminants in environmental samples. This was demonstrated by using the method for analysis of real snow and seawater samples. This work illustrates the great advantage of species-specific isotope dilution for the validation of an analytical speciation method—the possibility of overcoming species transformations and non-quantitative recovery. Analysis time is saved by use of the simultaneous method, because of the use of a single sample-preparation procedure and one analysis.     

A new multi analytical approach for the identification of synthetic and natural dyes mixtures. The case of orcein-mauveine mixture in a historical dress of a Sicilian noblewoman of nineteenth century

Abstract

In this paper, the application of a multi-analytical approach for the characterisation of synthetic and natural dyes in a historical textile is presented. The work is focused on a historical dress of a Sicilian noblewoman, dating from about 1865–1870. Firstly, SERS on fibre was performed, in order to individuate the classes of dyes employed. The SERS spectra suggested the presence of two main dyes: mauveine and orcein. In order to confirm these preliminary results, two different extraction protocols were applied. The extracts obtained were analysed by ESI-MS, MALDI-ToF and UHPCL-MS analyses, confirming the SERS results. In particular, the application of the ammonia mild extraction technique allowed to selectively extract the phenoxazonic dyes, separating them already in the extraction step from the synthetic ones. Thanks to this multi-analytical approach, this dress could be considered as one of the first examples of employment of synthetic dyes in association with natural ones.     

Conductance of potassium lodide in mixed solvents

The conductance of potassium iodide has been measured in the solvents ethylene carbonate, water, methyl ethyl ketone, and pairwise mixtures of these solvents at 40°C; and ethylene carbonate-water, tetramethylene sulfone-water, dimethyl sulfoxide-water, tetrahydrofuran-water, ethylene carbonate-tetramethylene sulfone-water, ethylene carbonate-tetramethylene sulfone, and tetrahydrofuran-dimethyl sulfoxide at 25°C. For dielectric constants greater than about 60, the pairing constants K_A are in the range 0.3–2.0; no correlation between K_A and solvent properties could be established. For lower dielectric constants, K_A increases exponentially with decreasing dielectric constant. Addition of a proton, acceptor to water initially decreases K_A regardless of whether the dielectric constant of the mixture is higher or lower than that of water, suggesting that ion pairs in water may be stabilized by cage structures. The Walden product A_o is also decreased by the addition of proton acceptors.     

Copper(II)–Ammonia Complexation Equilibria in Aqueous Solutions at Temperatures from 30 to 250°C by Visible Spectroscopy

The spectra of copper(II)–ammonia solutions in 2 mol-kg^–1 NH₄NO₃(aq) were recorded as a function of pH with a new UV–visible flow cell, capable of operating at conditions up to 325°C and 300 bars. Equilibrium constants for the formation of copper(II)–ammonia complexes Cu(NH₃)_n ²⁺, 1 n 4, from 30 to 150°C were determined by evolving factor analysis and nonlinear least-squares regression. Measurements at higher temperatures were limited by thermal decomposition of NH₄NO₃(aq). The formation constants of Cu(NH₃)_n ²⁺ decrease with temperature, consistent with extrapolations of literature data from measurements below 100°C. Measurements above 150°C were carried out in 0.5 mol-kg^–1 CF₃SO₃H (aq), at the very high ammonia concentrations required to avoid the precipitation of CuO(s). The spectra are consistent with Cu(NH₃)₄ ²⁺ as the predominant species, based on extrapolations of peak maxima and molar absorptivities from lower temperatures. Shifts in the spectra of Cu²⁺ and the Cu(NH₃)_n ²⁺ species to higher wavelength and increases in molar absorbance with increasing temperature are discussed in terms of the structure of the complexes.     

Binding of hexacyanoferrate(II) by aliphatic amines in aqueous solution

The stability of hexacyanoferrate(II)-amine(methylamine, ethylenediamine, diethylenetriamine and tetraethylenepentamine) was determined potentiometrically. Species Fe(CN)₆(A)H _j ^(j–4) (A=amine) are formed in all the systems investigated, with j=1...n+2 (n=number of aminogroups). Some other complexes Fe(CN)₆(A)_iH_j (with i>1) were also found. The stability of these complexes is fairly high: the full protonated amine species, show for the reaction Fe(CN)₆ ^4- + H_nAⁿ⁺ = Fe(CN)₆(A)H_n ^(n-4) an equilibrium constant given by logK=0.686+2.10n. Factors affecting the stability are discussed in comparison with similar systems, together with the importance of interferences.     

3-D-electron microscopy configuration of TMOS wet silica gels prepared by the quick-freeze,deep-etching-rotary-replication technique

Silica gel provides a useful medium for crystal growth; solution growth is confined to pores left free by the polymer during its development. All growth steps depend on the gel structure, which is not completely known for crystal growth conditions. Therefore, a three-dimensional (3-D) visualization has been performed for two TMOS aqueous gels, which are rather fragile: the quick-freeze, deep-etching, rotary-replication method has been applied for sample preparation. An original surface labeling technique has been used for surface recognition. The results concern the distribution of macropores that are responsible for crystal nucleation; micropores whose total volume is larger have not been visualized due to the limits of the method. These results are discussed in comparison with previous data performed by light scattering.     

Enthalpies of dilution of aqueous solutions of amides and alcohols

Enthalpies of dilution of aqueous systems containing formamide, dimethyl-formamide, the mixture of these amides, and each amide separately with mannitol, inositol, and cyclohexanol have been determined at 25°C. The data have been treated in terms of the Savage-Wood additivity principle and in combination with literature data. New values for the methylene-amide, carbinol-amide, and amide-amide group interaction enthalpies are presented. These may be used with data on a wider variety of solute systems to obtain interaction enthalpies for new groups.     

四元轻稀土硝酸盐水溶液体系{H2O+La(NO3)3+Pr(NO3)3+Nd(NO3)3}的热力学研究

在298.15 K条件下, 利用等压法研究了四元轻稀土硝酸盐水溶液{H2O La(NO3)3 Pr(NO3)3 Nd(NO3)3}及其3个二元亚系{H2O La(NO3)3}, {H2O Pr(NO3)3}和{H2O Nd(NO3)3}的热力学性质. 以NaCl或CaCl2水溶液为参考溶液, 测定了不同水活度条件下该四元溶液的渗透系数及各溶质组元的活度系数. 实验结果表明, 上述四元系与其3个二元亚系之间存在简单共性, 在实验误差允许范围之内(|Δ|≤0.0010), 该四元系符合偏理想溶液模型.     

Precise Conductance Measurements on Dilute Aqueous Solutions of Sodium and Potassium Hydrogenphosphate and Dihydrogenphosphate

Precise conductance measurements are reported on dilute aqueous solutions of the sodium and potassium salts of orthophosphoric acid at 25 ^∘C. Conductance measurements on solutions of electrolytes such as these phosphate salts that exist in solution as complicated mixtures of ions have previously proved difficult to interpret. To overcome this, a mathematical method has been developed to calculate the concentrations of all the species in the aqueous system M₃PO₄/M₂HPO₄/M₂HPO₄/H₃PO₄ (M = Na or K) over a continuous range of stoichiometries. The Lee–Wheaton conductance equation has been used to interpret the conductance of these multicomponent solutions in terms of the limiting ionic conductances and concentrations of all the ions in the solution. The limiting molar conductances of the ions H₂PO₄ ⁻ and HPO₄ ²⁻ and the ion-pair formation constants of these ions with sodium and potassium ions were determine This work has enabled the accurate determination of solution parameters for the important hydrogenphosphate ions in water and provides an excellent example of the use of an advanced conductance theory in the analysis of the conductance of multicomponent electrolyte systems.     

Thermodynamic properties of lithium chloride ammonia complexes for application inahigh-lifthigh temperature chemical heat pump

Ammonia absorption by and desorption from lithium chloride at different pressures has been studied using high-pressure differential scanning calorimetry, for application in a high-lift high temperature chemical heat pump. The measurements were performed under isobaric as well as under isothermal circumstances. Clausius–Clapeyron plots were constructed and used to calculate the thermodynamic parameters and to determine the stability regions of the different complexes. Controversies in literature as to the real existing phases are resolved.